Home

6 Key Steps Of Doing Asbestos Testing

Renovating and rejuvenating our home space is what we all seek towards achieving. But during remodeling, you can get exposed to harmful asbestos fibers which cause numerous illnesses and even cancer in some cases.

Asbestos finds in insulation paddings, linoleum, acoustic ceiling, floor tiles, drywalls, exterior stuccos, roofing materials, etc. If you live in a comparatively older house, then you are a potential victim of asbestos exposure.

You can eradicate these threats by considering asbestos removal. It is highly advisable to get rid of any asbestos material from your property, but before asbestos removal, you have to perform asbestos testing.

However, there are certain steps for asbestos testing. To avoid any dangerous situations the process should be precisely followed during testing. Mentioned below are five simple steps to follow during asbestos testing.

1- A detailed investigation

To find where you have asbestos present on your property, you have to do a thorough investigation. Places where generally asbestos is commonly found should be checked, and upon finding residue materials, they should be appropriately collected and sent to the authorized facility for testing.

2- PCM testing procedure

Phase Contract Microscopy is a widespread testing procedure for finding airborne asbestos material during asbestos testing. It exposes not only chemical fibers of asbestos but also sheds light upon a broad spectrum of possible fiber inflation.

The test checks for fiber concentration in air samples that determine whether asbestos particles are present in them or not. You should opt for this process as it takes very little time and is cost-effective.

3- TEM method

Transmission Electron Microscopy has now become the standard procedure for determining airborne particles as it can examine the tiniest of impurities very quickly. This is the highest level of inspection method available for determining airborne asbestos particles.

If the fiber particles in the air samples are too small for Phase Contract Microscopy, TEM gets the job done.

4- Sample of construction material

You need to examine the contents of the asbestos for better determination of its specific components and the potential of its chemical emission during asbestos testing. The technique that is used for this purpose is called Polarized Light Microscopy (PLM).

PLM uses a select grade polarized light to identify the specific mineral components of the air sample fibers that determine the chemical composition of the particles found. It defines various types and genres of fiber compounds that prevail in your property.

Asbestos Materials

5- Testing of soil properties

One needs to collect samples of the soil of the property and test it to see whether your soil contains residual particles of asbestos waste or not. Polarized Light Microscopy is the technique that is used for determining the grade of your property’s soil.

Unauthorized dumping of such harmful waste can damage the components of the land which, when put over time, begins to emit toxic fumes

6- Testing of water properties

Illegal dumping of toxic asbestos waste into these water bodies can, in return, supply contaminated water for drinking and other household purposes.

If any accumulated water bodies, ponds, lakes, rivers, etc. are situated near your property, you should collect a sample of that water and get it tested by a lab for residual asbestos waste while doing your asbestos testing.

Transmission Electron Microscopy is the technique used for determining the purity of the water sample.

If you feel that your property and locality are a potential victim of asbestos waste, then you should take the step of asbestos testing.

It will give you the proper answer to all of your doubts, and if found positive, you can take the necessary measures for removing the prevailing asbestos components in your property. Treat yourself to a safe and sound home by doing asbestos testing today.

Leave a Reply

Your email address will not be published. Required fields are marked *

Check Also
Close
Back to top button