Skip to toolbar

How To Clean A Paintball Gun?

Paintball is a fun game. Who doesn’t like to splatter color on their pals, now and then? But avid players know that it requires technique, flexibility, and teamwork. You need to go about the process tactfully, fire at your targets when they least expect it – and save yourself at all costs. If anything, getting hit hurts!

Buying a paintball gun comes easy, you can head over to your nearest mall or press a few keys on your laptop, and there it is – Guns & Safety Reviews! But what happens when all the paint collects inside the vessel? Your paintball gun gets dirty, the gunk caught inside compromises your shots, and you lose the game. Luckily there’s no need to fret, and you don’t have to throw away your old weapon. The only thing you should do is clean it so that it’s as good as new!

Keep in mind, the process will take time, but it isn’t rocket science. Just follow this step-by-step guide to deal with it like a pro!

 

Step 1:

Technically, paintball guns aren’t dangerous, but even the slightest mishandling can quickly turn them into serious safety hazards. Verily, start with detaching the air tank; the latter contains CO2, which can accidentally ignite and start a fire. This can cause serious harm to you and all those around you. In any case, do not point the gun at your face while doing removing the tank.

 

Step 2:

Pay close attention when taking the gun apart. Using the marker schematics, began by removing the hopper. Then, unfasten the bolt, hammer, grip frame, and barrel. A pro tip would be to take a cardboard box and put all the parts inside it for future reassembly.

Be careful to place all the screws next to their respective parts. This will save you the scramble of figuring out where all the components are supposed to go once you’re on the last step.

 

Step 3:

Don’t forget this step, because it’s just as important as the rest! To fix all the jamming, you have to clean the body of your paintball gun. And, you do not need any extra tools to get the job done. Simply use an old toothbrush to get inside the body and scrape the paint residue. While it should work, you can also use something smaller such as a Q-tip to clean the insides thoroughly.

 

Step 4:

The barrel is where all the paint is stored, and it can get pretty nasty when it hasn’t been cleaned for some time. This is where you expend some elbow grease and get to work. First, wash out as much of the gunk as you can and then scrub the insides.

You might want to use detergent to soften the debris and speed up the process. Some people prefer using a squeegee to make sure all the dirt gets out, but that’s not necessary. Nevertheless, using one can yield great results. But before you invest in one, read the instruction manual to find out what size will fit inside the barrel of your paintball gun.

 

Step 5:

The bolt and hammer are most prone to damage within the paintball gun, making this step just as much about cleaning as about scrutinizing the O-rings for damage. If you detect minute wear and tear, that’s alright. As for the cleaning bit, use a damp paper towel to wipe the pieces, and then set them out to dry.

 

Step 6:

Use something small to clean the grip frame, but whatever you do, don’t disassemble the trigger. Doing so isn’t easy at all and putting it back together correctly can be even harder. Once you’re done, dry this component thoroughly.

 

Step 7:

Move on to oiling once you’ve completed all the prior steps. To be on the safe side, check if all parts have completely dried. Also, to ensure that all components work in cohesion upon reassembly, using the right lubricating oil is imperative.

Do not make the mistake of taking something out of the pantry, as unsuitable substitutions can lead to great damage, and you might just end up with a malfunctioning paintball gun. You can read the instruction manual to find information on the kind of oil that should be used.

 

Step 8:

Naturally, everyone is eager for the final step because it means the gun is ready to be used in a match. Who wouldn’t like that?

Nevertheless, don’t let your excitement get the best of you. This is the most important step, and it requires attention to detail. You should put everything back together in an organized way, and use the right screws for the right parts. Doing otherwise will lead to incorrect reassembly, and the paintball gun won’t work. In worst-case scenarios,  it might even get irreversibly damaged -which is something you want to avoid at all costs.

We will be happy to hear your thoughts

Leave a reply

Viral Rang
Logo
Enable registration in settings - general