How To Unclog The Shower Drain

Hair is one of the most common causes of blockages in shower drains. There are a few easy techniques you can use to quickly clear your shower drain. Click Here Now to understand it better. To clear drain issues in the bathroom, most people use powerful chemical cleaners. However, there are other drain cleaning options that are much less harmful to your pipes.

Begin by straightening a string coat hanger’s body and twisting the hook to fit down the drain. After that, spread a paperclip out. Put on some rubber gloves and, if necessary, disconnect the drain strainer. Using your hands, take throw away the key any hair from the tip of the shower drain.

Then operate the shower until the sink is about four inches full and the blocked drain starts to clear gradually. Plunge the shower drain with a plunger. This will put the hair closer to the drain’s tip, making it simpler to remove. Pour the rest of the water down the drain. Pick any hair from near the top of the drain with your fingertips.


Take The Hanger

Put the hook-end of the coat hook into the shower drain. Move it around to capture any hairs that might have gotten into the drain opening. Hair should be removed and discarded. 

Replace the hanger in the drain a second or third time, but this time gently force it down the tube as far as it can go until letting go. To capture some hair, twist or shift the hanger in a clockwise direction. Remove any hair that has gotten stuck on the hanger.


Use The Paperclip

Just use a paperclip to capture any hair stuck on the peak of the shower drain or strainer if possible. Flush a cup of baking soda down the sewer if the shower drain is already blocked up. Flush a cup of vinegar down the sewer after waiting two minutes. After pouring the vinegar, cover the drain with a rag or plug to prevent it from escaping.

Pour a large volume of hot water down the sewer after 20 minutes to see if the blockage has been removed.

Detach the drain cover by loosening the bolt in the center of the cover or taking it off with a flat end screwdriver when that doesn’t fix the issue.  After removing the cover, use a flashlight to search for the blockage in the drain. Using the hanger to clear the obstacle if the blockage is detected and within reach. If you can’t see the clog, use a small plunger to clear it out.

To begin, apply a slim layer of petroleum to the plunger’s edges to establish a seal. Then, on the upper edge of the drain, put the plunger. If there isn’t any standing water when you start this stage, fill it up until the plunger is fully submerged.

Squeeze the plunger at least 15 times, then check with the torch to see if the blockage is visible. Remove the particles using the hanger procedure if the clog is clear. Continue the plunging step if the blockage is still not visible. If plunging fails to clear the clog, use a plumber’s snake to remove the debris.



If the clog continues despite these efforts, it’s best to seek help from a local plumber to fix the major issue.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button