10 kilopascals to pounds per square inch
1.45 psi
10 kPa = 1.45 psi.
pounds per square inch
1.45psi
10 kPa = 1.45 psi
In short
How many pounds per square inch is 10 kilopascals?
10 kPa = 1.45 psi. 1 kilopascal = 0.145038 pounds per square inch, so the working is 10 × 0.145038 = 1.45.
The working
The factor below is an exact definition rather than a measurement, so nothing is approximated in the arithmetic. The only rounding on this page happens where a number is displayed.
1 kilopascal = 0.145038 pounds per square inch 10 × 0.145038 = 1.45
How much precision do you need?
Each row is the same answer cut at a different number of decimals, with what that choice costs you. Pick the shortest row whose error is smaller than whatever you are measuring with.
| Rounded to | Answer (psi) | Off by |
|---|---|---|
| Whole number | 1 | −0.45038 |
| 1 decimal | 1.5 | +0.04962 |
| 2 decimals | 1.45 | −0.00038 |
Round trip: take 1.45 psi back the other way and you land on 9.9974 kPa — a drift of 0.0026 kPa. That gap is the rounding, not the conversion.
Frequently asked questions
What is 10 kilopascals in pounds per square inch?
10 kilopascals is 1.45 pounds per square inch. 1 kilopascal = 0.145038 pounds per square inch, so the working is 10 × 0.145038 = 1.45.
How accurate is 1.45 psi?
Rounding to 1.45 psi and converting straight back gives 9.9974 kPa, a drift of 0.0026 kPa from the 10 you started with. The factor itself is exact; every bit of that difference comes from the rounding, not the conversion.
Nearby values
Any value at all
kPa to PSI Converter
Convert kilopascals to psi — the unit on most tyre placards outside the US.
Open the kPa to PSI converter →