120 kilopascals to pounds per square inch
17.40 psi
120 kPa = 17.40 psi.
pounds per square inch
17.40psi
120 kPa = 17.40 psi
In short
How many pounds per square inch is 120 kilopascals?
120 kPa = 17.40 psi. 1 kilopascal = 0.145038 pounds per square inch, so the working is 120 × 0.145038 = 17.40.
The working
The factor below is an exact definition rather than a measurement, so nothing is approximated in the arithmetic. The only rounding on this page happens where a number is displayed.
1 kilopascal = 0.145038 pounds per square inch 120 × 0.145038 = 17.40
How much precision do you need?
Each row is the same answer cut at a different number of decimals, with what that choice costs you. Pick the shortest row whose error is smaller than whatever you are measuring with.
| Rounded to | Answer (psi) | Off by |
|---|---|---|
| Whole number | 17 | −0.40453 |
| 1 decimal | 17.4 | −0.00453 |
| 2 decimals | 17.40 | −0.00453 |
Round trip: take 17.40 psi back the other way and you land on 119.9688 kPa — a drift of 0.0312 kPa. That gap is the rounding, not the conversion.
Frequently asked questions
What is 120 kilopascals in pounds per square inch?
120 kilopascals is 17.40 pounds per square inch. 1 kilopascal = 0.145038 pounds per square inch, so the working is 120 × 0.145038 = 17.40.
How accurate is 17.40 psi?
Rounding to 17.40 psi and converting straight back gives 119.9688 kPa, a drift of 0.0312 kPa from the 120 you started with. The factor itself is exact; every bit of that difference comes from the rounding, not the conversion.
Nearby values
Any value at all
kPa to PSI Converter
Convert kilopascals to psi — the unit on most tyre placards outside the US.
Open the kPa to PSI converter →