230 kilopascals to pounds per square inch
33.36 psi
230 kPa = 33.36 psi.
pounds per square inch
33.36psi
230 kPa = 33.36 psi
In short
How many pounds per square inch is 230 kilopascals?
230 kPa = 33.36 psi. 1 kilopascal = 0.145038 pounds per square inch, so the working is 230 × 0.145038 = 33.36.
The working
The factor below is an exact definition rather than a measurement, so nothing is approximated in the arithmetic. The only rounding on this page happens where a number is displayed.
1 kilopascal = 0.145038 pounds per square inch 230 × 0.145038 = 33.36
How much precision do you need?
Each row is the same answer cut at a different number of decimals, with what that choice costs you. Pick the shortest row whose error is smaller than whatever you are measuring with.
| Rounded to | Answer (psi) | Off by |
|---|---|---|
| Whole number | 33 | −0.35868 |
| 1 decimal | 33.4 | +0.04132 |
| 2 decimals | 33.36 | +0.00132 |
Round trip: take 33.36 psi back the other way and you land on 230.0091 kPa — a drift of 0.0091 kPa. That gap is the rounding, not the conversion.
What 230 kPa looks like
220 kPa
A typical cold tyre pressure on a placard written in kilopascals, which is the unit most of the world outside the United States uses.
Frequently asked questions
What is 230 kilopascals in pounds per square inch?
230 kilopascals is 33.36 pounds per square inch. 1 kilopascal = 0.145038 pounds per square inch, so the working is 230 × 0.145038 = 33.36.
How accurate is 33.36 psi?
Rounding to 33.36 psi and converting straight back gives 230.0091 kPa, a drift of 0.0091 kPa from the 230 you started with. The factor itself is exact; every bit of that difference comes from the rounding, not the conversion.
Nearby values
Any value at all
kPa to PSI Converter
Convert kilopascals to psi — the unit on most tyre placards outside the US.
Open the kPa to PSI converter →