80 kilopascals to pounds per square inch
11.60 psi
80 kPa = 11.60 psi.
pounds per square inch
11.60psi
80 kPa = 11.60 psi
In short
How many pounds per square inch is 80 kilopascals?
80 kPa = 11.60 psi. 1 kilopascal = 0.145038 pounds per square inch, so the working is 80 × 0.145038 = 11.60.
The working
The factor below is an exact definition rather than a measurement, so nothing is approximated in the arithmetic. The only rounding on this page happens where a number is displayed.
1 kilopascal = 0.145038 pounds per square inch 80 × 0.145038 = 11.60
How much precision do you need?
Each row is the same answer cut at a different number of decimals, with what that choice costs you. Pick the shortest row whose error is smaller than whatever you are measuring with.
| Rounded to | Answer (psi) | Off by |
|---|---|---|
| Whole number | 12 | +0.39698 |
| 1 decimal | 11.6 | −0.00302 |
| 2 decimals | 11.60 | −0.00302 |
Round trip: take 11.60 psi back the other way and you land on 79.9792 kPa — a drift of 0.0208 kPa. That gap is the rounding, not the conversion.
Frequently asked questions
What is 80 kilopascals in pounds per square inch?
80 kilopascals is 11.60 pounds per square inch. 1 kilopascal = 0.145038 pounds per square inch, so the working is 80 × 0.145038 = 11.60.
How accurate is 11.60 psi?
Rounding to 11.60 psi and converting straight back gives 79.9792 kPa, a drift of 0.0208 kPa from the 80 you started with. The factor itself is exact; every bit of that difference comes from the rounding, not the conversion.
Nearby values
Any value at all
kPa to PSI Converter
Convert kilopascals to psi — the unit on most tyre placards outside the US.
Open the kPa to PSI converter →